Toggle Nav
Search
  • 0 My Cart
Toggle Nav
main product photo

General Electric WR55X28411 Defrost Sensor Cable

Be the first to review this product
Special Price $42.95 Regular Price $51.95
In stock
Available Quantity:   62
SKU
WR55X28411

Product Description

The General Electric WR55X28411 Defrost Sensor Cable helps in monitoring the temperature of the evaporator coil all the time the ice layer is thick enough, the low temperature is sensed by the sensor, and the control board is informed to start the defrosting process. This warms the defrost heater which melts the thick frost and clears blockages within the cooling system, the temperature is back to the optimal level, and the defrosting procedure is halted to avoid further waste of energy and maintain proper temperature control.
Add to Wish List
3.85"X9.05"X0.8"
Manufacturer
https://www.hnkparts.com/media/catalog/product/w/r/wr55x28411-36005.jpg

This Part Fits the Following Models (5)

Write Your Own Review
You're reviewing:General Electric WR55X28411 Defrost Sensor Cable
Your Rating
FAQS
Customer Questions
What maintenance is required for the General Electric WR55X28411 Defrost Sensor Cable?

Regularly inspect the defrost sensor cable for visible wear, corrosion, or loose connections to ensure accurate temperature sensing. Keep the surrounding area clean and free of ice buildup that could interfere with proper operation. Proper electrical connections should be maintained to prevent signal interruptions or false readings.

What are common issues with the General Electric WR55X28411 Defrost Sensor Cable?

  • Sensor failure causing incorrect temperature readings.
  • Intermittent or open circuit leading to defrost cycle malfunctions.
  • Wiring damage from moisture or ice exposure.
  • Loose or corroded connections affecting performance.
  • Inconsistent cooling due to faulty sensor responce.

Installation Steps

Step1: Unplug refrigerator and shut off power at breaker to prevent electric shock wear protective gloves.

Step2: Remove freezer shelves and access rear panel screws; keep parts organized.

Step3: Unscrew panel and locate old defrost sensor cable; note routing.

Step4: Disconnect wiring harness and carefully remove damaged cable.

Step5: Install new defrost sensor cable, matching original routing and connections.

Step6: Reassemble panel, restore power, and verify normal cooling operation.