The Whirlpool WPW10535776 Range Outer Door Glass provides protection and a heat shield to the door of the oven to enable effective cooking. It is made to be heat resistant and used in maintaining high internal temperatures while the outside surface remains relatively cool to the touch. This glass panel is designed to be rigid and it is installed on the door of the oven where it slides in to give a clear view of the contents of the oven.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The Whirlpool range should be disconnected from its electrical supply, allowing it to cool down entirely.
Step 2: The oven door should be opened and the inner door glass panel should be taken out. A putty knife or screwdriver may be required to detach the inner door panel from the oven door frame.
Step 3: The screws that hold the outer door glass panel to the oven door frame should be taken out.
Step 4: The old outer door glass panel should be gently elevated and extracted from the oven door frame.
Step 5: The new WPW10535776 Whirlpool Range Black Exterior Door Glass should be inserted into the oven door frame. The holes in the door glass should be ensured to align with the matching holes in the oven door frame.
Step 6: The outer door glass panel should be fastened to the oven door frame with the same screws that were previously removed.
Step 7: The inner door glass panel should be reattached onto the oven door frame.
Step 8: The Whirlpool range should be reconnected to the electrical supply and enjoyed.
Please note that these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if one is available.
