The Whirlpool WPW10250742 Washer Detergent Drawer is designed to dispense detergent, fabric softener and other washing additives for better washing results. Intended to release each component at the right stage of the wash cycle, it ensures even distribution and prevents the formation of residue. This feature makes it easy to mix it with water and at the same time does not clog easily when rinsing. This replacement part ensures that the appliance is working as it should to wash and also prolong the durability of the appliance.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Your appliance should be disconnected from the electrical outlet and subsequently the drawers should be taken out from the appliance.
Step 2: With a screwdriver, the screws located inside the frame that secure the slide sides to the bottom of the drawer should be taken off.
Step 3: The slotted screws that hold the slide mechanism to the bottom of the drawer should be removed.
Step 4: The slide mechanism should be carefully detached from the drawer by being lowered down.
Step 5: The slide mechanism should be slowly extracted from the side bracket.
Step 6: The new drawer slide-bottom should be taken and inserted into the side bracket.
Step 7: The slide mechanism should be reattached to the bottom of the drawer using the same slotted screws.
Step 8: The sides of the slide should be fastened to the drawer's bottom with the screws.
Step 9: The drawer should be reinserted into the appliance and the plug should be reconnected to the electrical outlet.
Step 10: The slide's functionality should be verified to confirm proper installation and adjustments should be made if necessary.
Well done! The Whirlpool WPW10250742 drawer slide-bottom has been successfully replaced.
It is important to note that these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if available.
