Whirlpool WP3400918 Dishwasher Spray Arm Retainer

Special Price $16.98 Regular Price $28.86
In stock
Available Quantity:   99
SKU
WP3400918

Product Description

The little but essential Whirlpool WP3400918 Dishwasher Spray Arm Retainer of your dishwasher. It securely holds the spray arm in place, ensuring appropriate water distribution and cleaning during the wash cycle. Water is sprayed up and over the plates by the rotating spray arm during the wash cycle. Spraying water with too much force or in the wrong direction compromises wash efficacy and may damage crockery. Usually constructed of sturdy plastic, this replacement component is intended to match particular Whirlpool dishwasher models. By repairing a broken or worn-out spray arm retainer, you can restore maximum cleaning force and ensure that your dishes are thoroughly cleaned every single time.

Manufacturer
✓ This Product Replaces: 3400922, 3400918
https://www.hnkparts.com/media/catalog/product/w/p/wp3400918-66963.jpg

This Part Fits the Following Models (752)

KitchenAid KUDS30CXWH5 Dishwasher KitchenAid KUDS30CXWH6 Dishwasher KitchenAid KUDS30CXWH7 Dishwasher KitchenAid Undercounter Dishwasher KUDE48FXBL6 KUDE48FXBL6 KitchenAid Undercounter Dishwasher KUDE20IXSSA KUDE20IXSSA KitchenAid Undercounter Dishwasher KUDE48FXWH6 KUDE48FXWH6 KitchenAid Undercounter Dishwasher KUDE48FXSS6 KUDE48FXSS6 KitchenAid KUDS01DJSS0 Dishwasher KitchenAid KUDS01DJSW0 Dishwasher KitchenAid Dishwasher KDTM404EBS1 KDTM404EBS1 KitchenAid Dishwasher KDTM404EBL3 KDTM404EBL3 KitchenAid Dishwasher KDTM404EBS0 KDTM404EBS0 KitchenAid Dishwasher KDTM404EBL2 KDTM404EBL2 KitchenAid Dishwasher KDTM404EBL1 KDTM404EBL1 KitchenAid KUDS01DJWH0 Dishwasher
Showing 1-15 of 752
Manufacturer Name: WHIRLPOOL
Product Number: WP3400918
OEM Part Number: WP3400918
Product Description: Retainer

Choose the best Home Appliance parts and supplies from HnKParts!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)723-0907 or [email protected]

Write Your Own Review
You're reviewing:Whirlpool WP3400918 Dishwasher Spray Arm Retainer
Your Rating
Customer Questions
No Questions

Installation Steps

Step 1: Collect the required tools. A Phillips head screwdriver, a small flathead screwdriver, and the new WP3400918 retainer will be needed.

Step 2: Disconnect the appliance. Prior to starting your repair, it should ensure that the appliance is disconnected from the wall outlet to avoid any risk of electrical shock or damage.

Step 3: Take out the mounting screws. There are likely 4-5 screws situated on the bottom of the appliance that are securing the retainer. Your Phillips head screwdriver should be utilized to take them out.

Step 4: Gently extract the retainer from underneath the appliance. If it is adhered, a small flathead screwdriver should be used to carefully pry it loose.

Step 5: Place the new retainer. It should ensure that the four sides are properly aligned, then it should be pressed into position at the four corners.

Step 6: Reinstall the mounting screws. The retainer should be fastened using the screws that were removed in Step 3.

Step 7: Reconnect the appliance. After the retainer has been installed, power should be restored to ensure everything operates correctly.

The Whirlpool WP3400918 retainer has been successfully swapped!

Please note, these instructions are served as general guidance and should always be accompanied by the manufacturer's manual, if available.