Whirlpool WP34001340 Washer Drain Pump Motor

Special Price $96.58 Regular Price $142.92
In stock
Available Quantity:   104
SKU
WP34001340

Product Description

The Whirlpool WP34001340 is an alternative drain pump motor for front-load washing machines. It's a vital part that makes up the washer's drainage system. During the wash cycle, the washing machine fills with enough water to clean your garments. When the washing cycle is finished, the drain pump motor activates. It revolves around a small impeller that pulls water out of the washer through the drain hose. This procedure recurs until the washer tub is almost empty. An employed drain pump motor is essential for making sure your washing machine cycles efficiently and does not overflow. Replacing the damaged drain pump motor will help your washer drain more effectively while preventing the development of mildew because of excessive water content.

Manufacturer
✓ This Product Replaces: 34001340
https://www.hnkparts.com/media/catalog/product/w/p/wp34001340-97803.jpg
Manufacturer Name: WHIRLPOOL
Product Number: WP34001340
OEM Part Number: WP34001340
Product Description: Pump-Asm

Choose the best Home Appliance parts and supplies from HnKParts!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)723-0907 or [email protected]

Write Your Own Review
You're reviewing:Whirlpool WP34001340 Washer Drain Pump Motor
Your Rating
Customer Questions
No Questions

Installation Steps

Step 1: The screws securing the back panel of the appliance should be taken out.

Step 2: The panel should be removed to gain access to the pump and additional components.

Step 3: The pump assembly should be identified and the two hoses attached to it should be disconnected.

Step 4: Pliers should be employed to loosen and detach the clamps holding the hoses to the pump.

Step 5: The screws that secure the pump assembly should be removed.

Step 6: A flathead screwdriver should be utilized to gently pry it from the base.

Step 7: The new pump assembly should be carefully inserted into the base.

Step 8: It should be fastened using the screws that were taken out in Step 6.

Step 9: The two hoses should be reattached to the pump assembly, ensuring they are properly connected.

Step 10: Pliers should be used to secure the hose clamps by tightening them in place.

Step 11: The back panel should be replaced and secured with the screws.

Step 12: All connections should be verified and everything should be ensured firmly secured.

Step 13: The appliance should be reconnected to its electrical outlet and power should be restored.

Well done! The Whirlpool WP34001340 PUMP-ASM has been successfully swapped.

Please note, these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.