General Electric WH49X27328 Washer Tub Kit used to repair washing machines by replacing parts such as the hub nut, washers, and agitators. This kit help in the proper functioning of the washing machine by holding the tub assembly in place, preventing leakage and ensuring that the tub is well aligned during washing. The hub nut and washers offer support to the drum while the agitator helps in the cleaning process by moving the clothes through water and detergent. Advantages include enhanced cleaning efficiency, and longer durability of the appliance.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The dryer power cord should be disconnected from the electrical outlet.
Step 2: The four existing screws securing the front of the dryer should be taken out, then the dryer should be pulled a few inches away from the wall.
Step 3: The bolt located on the top of the dryer should be loosened using a socket wrench to detach the drum.
Step 4: The front panel, hub nut assembly, and the two washers encircling the drive shaft should be detached.
Step 5: The new GE WH49X27328 KIT TUB 24 HUB NUT WASHERS & BOLT should be positioned, ensuring the washers are set around the drive shaft.
Step 6: The new assembly should be secured with the provided bolts, ensuring they are tightened properly.
Step 7: The drum should be reinserted into the dryer and the top bolt should be tightened with the socket wrench.
Step 8: The front of the dryer should be reconstructed, and the power cord should be reconnected to the electrical outlet.
Your dryer should now be prepared for operation with the new GE WH49X27328 KIT TUB 24 HUB NUT WASHERS & BOLT.
Please remember that these instructions should be served as general guidance and should always be followed alongside the manufacturer's manual, if one is available.
