General Electric WH08X10054 Washer Tub Seal

Special Price $28.59 Regular Price $47.95
In stock
Available Quantity:   9
SKU
WH08X10054

Product Description

The General Electric WH08X10054 Washer Tub Seal is a protective part that allows users to avoid water leaks within the internal and exterior tubs of the appliance. Its function is to ensure that it has a tight seal and the internal tub is free to turn. The seal is of a flexible, compression-fit design, which clamps on the edges of the container and prevents water from leaking out of the cabinet. It is installed within the internal and external tubs at the front of the washer and is located around the tub opening.
Washing Machine Parts, Gaskets|Seals|O-Rings,
14.2"X9.35"X1"
Manufacturer
https://www.hnkparts.com/media/catalog/product/w/h/wh08x10054-94305.jpg
Write Your Own Review
You're reviewing:General Electric WH08X10054 Washer Tub Seal
Your Rating
Customer Questions
What maintenance is required for the General Electric WH08X10054 Tub Seal?

Inspect the seal periodically for wear or deformation. Clean surrounding areas to prevent detergent residue buildup. Avoid overloading, which may pressure the seal. Monitor for moisture around the tub to ensure a watertight barrier and accurate washing performance.

What are common issues with the General Electric WH08X10054 Tub Seal?

  • Water leaking beneath the tub.
  • Moisture accumulation around housing.
  • Unusual noise during spin cycles.
  • Reduced sealing effectiveness.

Installation Steps

Step1: Unplug the washer and shut off the water supply.

Step2: Remove the front panel to access the tub seal area.

Step3: Detach the old seal from the drum rim carefully.

Step4: Clean the sealing surface thoroughly to remove residue.

Step5: Fit the new seal evenly around the tub opening.

Step6: Reassemble unit and run cycle to check leaks.