General Electric WH01X29177 Washer Foot & Base

Step 1: The washing machine is disconnected from the power source and any residual water is drained from the tub.

Step 2: A towel or soft fabric is positioned on the floor beneath the washing machine to prevent scratches during the repair.

Step 3: The foot and base screws are identified and taken out, typically found at the bottom of the washing machine near the rear panel.

Step 4: The foot and base are gently elevated off the washing machine and placed aside.

Step 5: The new GE WH01X29177 foot and base are set onto the washing machine.

Step 6: The foot and base are fastened utilizing the screws that were removed earlier.

Step 7: The screws are secured tightly using a screwdriver or an adjustable wrench.

Step 8: The washing machine is reconnected to the wall outlet and any hoses, clamps, or other components that were removed during the repair are reinstalled.

Step 9: The washing machine is verified to function properly to confirm that the new foot and base are installed correctly.

Please remember, these guidelines are intended for general assistance and should always be utilized alongside the manufacturer's manual, if accessible.