General Electric Wh01X24180 Washing Machine Drive Belt

Special Price $10.50 Regular Price $17.25
In stock
Available Quantity:   207
SKU
WH01X24180

Product Description

The General Electric WH01X24180 Washing Machine Drive Belt is connected to the drum to enhance the washing process by allowing the drum to rotate. This rubber belt transfers the torque from the motor to the drum so that it can agitate and spin during the cycles. When the motor is on, friction is made to turn the drum to make sure the clothes are cleaned and rinsed adequately. The benefits increased the efficiency and durability of the machine.
Drive Belts,
Manufacturer
https://www.hnkparts.com/media/catalog/product/w/h/wh01x24180_general-electric_hnkparts.png

This Part Fits the Following Models (60)

Showing 1-15 of 60
Manufacturer Name: GENERAL ELECTRIC
Product Number: WH01X24180
OEM Part Number: WH01X24180
Product Description: Drive Belt

Choose the best Home Appliance parts and supplies from HnKParts!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)723-0907 or [email protected]

Write Your Own Review
You're reviewing:General Electric Wh01X24180 Washing Machine Drive Belt
Your Rating
Customer Questions
What maintenance is required for the General Electric WH01X24180 Drive Belt?

Regularly inspect the washing machine drive belt for signs of wear, cracking, or fraying and replace it if damaged. Ensure proper tension and alignment during installation to prevent slipping. Keep the surrounding area clean from debris and unplug the appliance before servicing for safety.

What are common issues with the General Electric WH01X24180 Drive Belt?

  • Belt slipping during operation causing reduced drum movement.
  • Cracking or fraying due to wear over time.
  • Complete breakage leading to drum not spinning.
  • Squealing noises from improper tension or misalignment.

Installation Steps

Step1: Unplug washer and turn off water supply for safety.

Step2: Tilt washer back and remove the bottom access panel.

Step3: Locate the motor and drum pulleys; remove the worn belt.

Step4: Loop the new belt around the motor pulley first, then the drum pulley.

Step5: Rotate the drum by hand to align the belt.

Step6: Reattach the panel, return washer upright, and test operation.