The General Electric WE03X25314 Dryer-Bearing-Top Assembly helps the drum to rotate smoothly and quietly increasing the efficiency and durability of the dryer. This assembly helps to support the drum and at the same time minimize friction. It operates in a manner that establishes a stable point of rotation for the drum and this leads to its smooth rotation without much friction. It is built to last, reduces noise, protects the dryer from overheating, and also increases the longevity of the dryer.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The appliance should be disconnected from the electrical outlet prior to commencing any repair activities.
Step 2: The unit's top cover should be taken off by unscrewing the fasteners located along the edges.
Step 3: The Drum baffle assembly should be gently detached and placed aside.
Step 4: The wiring harness attached to the bearing top assembly should be unplugged.
Step 5: The bearing top assembly should be extracted by loosening the mounting screws.
Step 6: The new bearing top assembly should be positioned, with the wiring harness being reconnected and the mounting screws being reattached.
Step 7: The Drum baffle assembly should be reattached, with the parts being ensured to realign with the drum and side wall notches.
Step 8: The top cover should be carefully repositioned onto the unit, being fastened with the screws removed earlier.
Step 9: Power to the appliance should be restored by plugging it back into the wall and the unit should be checked for correct functionality.
It is essential to note that these instructions are served as general guidance and should always be followed alongside the manufacturer's manual, if available.
