Step 1: Begin by verifying that the correct replacement LP Conversion Kit Assembly is possessed. The WB49X26658 kit must encompass the following components: 1 regulator valve, one conversion orifice, one tee cap, one hose, and one fitting. Confirm that all necessary components are available before proceeding.
Step 2: Prior to starting, the gas supply to the range must be shut off and the gas supply line must be detached from the gas inlet connection.
Step 3: The current LP Conversion Kit Assembly must be extracted, which is generally situated beneath the cooktop.
Step 4: The new regulator valve must be placed into the range, ensuring it is firmly fastened with the provided screws.
Step 5: With the regulator valve installed, the conversion orifice and tee cap must be secured utilizing the included hardware. The orifice is usually fitted with a #10 hex head screwdriver.
Step 6: The supplied hose must be attached to the tee cap and subsequently to the gas inlet connection of the range.
Step 7: Lastly, the supplied fitting must be fastened to the opposite end of the hose and then the gas supply line must be reconnected to the gas inlet connection.
Step 8: After all connections are made, the gas supply must be activated and any gas leaks must be inspected.
Step 9: When it is confident that no gas leaks are present, the LP Conversion Kit Assembly replacement process is finalized.
Please remember that these instructions serve as general guidance and should always be used alongside the manufacturer's manual, if available.
