General Electric WB28X26621 Range Orifice Holder

Step 1: The gas supply to the oven should be turned off by beginning. This entails the gas shutoff valve being shut and also the power to the oven being deactivated.

Step 2: The oven racks should be taken out and placed aside.

Step 3: The fasteners that secure the top panel should be unscrewed and it should be taken off.

Step 4: The faulty orifice holder should be identified, which can be found beneath the top panel.

Step 5: The wires from the malfunctioning orifice holder should be detached and it should be unscrewed using a wrench.

Step 6: The new orifice holder should be positioned and fastened with the supplied screws.

Step 7: The wires should be attached to the new orifice holder, ensuring they are firmly secured.

Step 8: The top panel should be reinstalled, confirming that it is tightly secured and sealed.

Step 9: The gas supply and power to the oven should be reactivated. The oven should be switched on to verify its proper operation.

Step 10: The oven racks should be reinserted and your fully operational oven with its new, efficient orifice holder should be enjoyed.

Please remember, these directions serve as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.