The store will not work correctly in the case when cookies are disabled.
We collect user information to provide a better user experience and protect the security of our website. By continuing to use our website, you acknowledge the use of cookies.
The General Electric WB19T10084 Range Gas Valve manages the flow of gas to a surface burner to allow controlled ignition and adjustment of the flame during cooking. It is fitted in between the gas manifold and burner outlet in a position between the control shaft and mounting structure to place it. The valve also connects with the system of control knobs to control the release of the gas. It assists in maintaining a constant flow of fuel, stability in flame control and uniform operation of the burner in the usual cooking cycles.
Step 1: The gas supply leading to the valve should be shut off. This action will prevent any gas from leaking during the replacement.
Step 2: The old valve should be detached by removing the mounting screws with a screwdriver. The old valve should be gently pulled away from the connected pipe.
Step 3: The new GE WB19T10084 valve should be taken and affixed to the pipe. New mounting screws should be utilized to secure the valve firmly in position.
Step 4: The gas supply to the valve should be restored and any potential leaks should be inspected.
Step 5: If no leaks are detected, the installation has been successfully completed! Your new GE WB19T10084 VALVE GAS is now ready for operation.
It is important to note that these instructions are served as general guidance and should always be accompanied by the manufacturer's manual, if one is available.
