The Whirlpool W11416362 Dishwasher Pump & Motor Assembly provides water force for effective dish washing. This is used to effectively pump water through the spray arms and to dislodge food particles and grease. It works through the use of an electric motor that rotates the impeller and at the same time, providing high water pressure for efficient removal of wastewater.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Your Whirlpool W11416362 pump and motor should be identified, then its power source should be turned off prior to starting any repairs on the unit. Either the power cord should be unplugged from the wall outlet or the breaker in the main fuse box that supplies power to the unit should be deactivated.
Step 2: The water supply line attached to the unit should be found and disconnected by unscrewing the fitting. Any residual water should be drained into a bucket or basin before moving forward with the repair.
Step 3: The screws that hold the motor and pump assembly in place should be identified and taken out. Each screw and its original position should be kept track of for straightforward reassembly. After all screws are removed, the motor and pump assembly should be gently lifted from the unit and set aside.
Step 4: The new motor and pump assembly should be inserted back into the unit and fastened using the screws. It should be verified that all connections are secure and that there are no gaps in the seal to avert any potential leaks.
Step 5: The water supply line should be reconnected to the unit, making sure it forms a tight seal. The water supply to the unit should be activated, and any leaks at the connection should be inspected before proceeding.
Step 6: After confirming that all connections are secure, the power cord should be reconnected to the wall outlet or the breaker should be switched back to the “on” position. The unit should be powered on and sufficient time should be allowed for water to circulate through the system before utilizing your newly installed Whirlpool W11416362 pump and motor.
Please remember, these instructions should serve as general guidance and should always be referenced alongside the manufacturer's manual, if available.
