The Whirlpool W11393685 Washer Gear Case helps in the smooth functioning of the washing machine by transmitting the power from the motor to the agitator or drum. Ensures that the product operates to the better of its capacity with low noise levels and leakage. It operates by converting the motor’s rotary movement into the required motion for washing and spinning cycles to maintain fabric quality.
What maintenance is required for the Whirlpool W11393685 Gear Case?
Inspect the gear case regularly for leaks, cracks, or unusual noises. Clean surrounding areas to prevent debris buildup. Ensure mounting bolts are secure and lubricate moving parts as recommended by the manufacturer while disconnecting the washer from power.
What are common issues with the Whirlpool W11393685 Gear Case?
Spin cycle produces grinding noise.
Drum rotation slows under load.
Washer vibrates excessively during spin.
Transmission area shows oil residue.
Installation Steps
Step 1: The dishwasher should be disconnected from the power source or the circuit should be deactivated at the breaker panel.
Step 2: The water supply line should be detached from the appliance.
Step 3: The dishwasher door should be lifted and the two screws securing the access panel should be taken out.
Step 4: The access panel should be taken off and the gearcase positioned at the rear of the dishwasher should be located.
Step 5: The screws that secure the cover plate of the gearcase should be extracted and then the plate should be taken off.
Step 6: The mounting bolts that connect the gearcase to the dishwasher should be unscrewed, then it should be carefully pulled free from the unit.
Step 7: The new W11393685 gearcase should be installed. Threadlocker should be applied on the mounting bolts prior to them being secured.
Step 8: The dishwasher should be reassembled by following the previous steps in reverse order.
Step 9: The water supply should be restored and then the power to the dishwasher should be reconnected or activated.
Step 10: A dishwasher cycle should be initiated to confirm that everything operates as expected.
Please note that these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.
