The Whirlpool W11381654 is a genuine replacement drain hose made particularly for Whirlpool dishwashers. It's a 12-foot-long, flexible tube that directs wastewater from the dishwasher into your sink's drain system. During the wash cycle, water and food particles are expelled from the dishwasher via the drain hose. The hose connects to the dishwashing pump on one end and, depending on your setup, the waste disposal or air gap on the other. This is especially beneficial if your sink drain is located far from the dishwasher's specified drain outlet. A typical hose may not reach, potentially resulting in leaks or poor draining. The W11381654's increased length ensures a correct and secure connection, enabling your dishwasher operate efficiently.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Your washing machine should be disconnected from the electrical outlet and the water supply should be shut off.
Step 2: A bucket should be positioned under the hose-drain connection to catch any residual water that might remain in the hose.
Step 3: The hose-drain connection located at the rear of the washing machine should be identified, typically situated near the bottom of the appliance.
Step 4: Adjustable pliers should be employed to detach the hose-drain by loosening the hose clamp and then removing the hose.
Step 5: The threads of the new hose-drain should be coated with Teflon tape, which should come with the new component.
Step 6: The new hose-drain should be affixed to the washing machine by securing the hose clamp.
Step 7: The power cord should be reconnected to the electrical outlet and the water supply should be restored.
Step 8: The new hose-drain should be verified by executing a short cycle to confirm it operates correctly.
Please note that these guidelines are intended for general assistance and should always be utilized alongside the manufacturer's manual, if available.
