Whirlpool W11116990 Microwave Button Holder

Step 1: The microwave should be disconnected from the wall outlet and detached from any mounting brackets.

Step 2: The outer cabinet should be taken off by unscrewing the screws/bolts located at the four corners of the cabinet.

Step 3: The metal plate found at the top of the control panel should be removed. 4 screws will need to be unscrewed to detach the metal plate.

Step 4: Within the control panel, the button holder assembly should be located. The screws securing it in position should be unscrewed. After the screws are taken out, the complete button holder assembly should be extracted.

Step 5: The new button holder assembly (part W11116990) should be grabbed and placed into the control panel. It should be fastened by reinserting the screws.

Step 6: The metal plate should be reattached to the top of the control panel.

Step 7: The screws/bolts for the outer cabinet should be reinserted.

Step 8: The microwave should be reinstalled back into its original mounts.

Step 9: The microwave should be reconnected to the wall outlet and a test should be conducted.

By following these steps, the W11116990 Whirlpool microwave button holder can be efficiently and swiftly replaced. Necessary safety measures should always be taken and protective equipment should be donned when required to guarantee safety.

Please remember that these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if one is available.