Whirlpool W10445975 Dishwasher Pump Hose

Special Price $39.38 Regular Price $74.35
In stock
Available Quantity:   424
SKU
W10445975

Product Description

The Whirlpool W10445975 is an important replacement component for your dishwasher's circulation system. This is a hose that connects the circulation pump to the sump, which is the bottom reservoir where wash water and debris accumulate. During the wash cycle, the circulation pump pulls water from the sump and pushes it through the spray arms, cleaning your dishes. The W10445975 guarantees that this critical water flow runs smoothly. A damaged or leaking hose can disturb this process, resulting in poor cleaning performance, odd noises, and even water leaks inside your dishwasher. Replacing a faulty W10445975 with a genuine original equipment manufacturer part such as this one ensures compatibility, quality, and restores your dishwasher's full functionality.

Manufacturer
https://www.hnkparts.com/media/catalog/product/w/1/w10445975_whirlpool_hnkparts.png

This Part Fits the Following Models (843)

Maytag MDB6949SDH0 Dishwasher Maytag MDB6949SDH1 Dishwasher Maytag MDB6949SDE0 Dishwasher Maytag MDB6949SDM0 Dishwasher Maytag MDB7949SDM1 Dishwasher Maytag MDB7949SDM3 Dishwasher Maytag MDB7949SDZ0 Dishwasher Maytag MDB7959SHZ1 Dishwasher Maytag MDB7959SHZ0 Dishwasher Maytag MDB7959SHK0 Dishwasher Maytag MDB7979SHZ0 Dishwasher Maytag MDB7979SHZ1 Dishwasher Maytag MDB7949SDE1 Dishwasher Maytag MDB7949SDH1 Dishwasher Maytag MDB7949SDH2 Dishwasher
Showing 1-15 of 843
Manufacturer Name: WHIRLPOOL
Product Number: W10445975
OEM Part Number: W10445975
Product Description: Hose

Choose the best Home Appliance parts and supplies from HnKParts!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)723-0907 or [email protected]

Write Your Own Review
You're reviewing:Whirlpool W10445975 Dishwasher Pump Hose
Your Rating
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

Installation Steps

Step 1: Prior to commencing the task, the power supply to the dishwasher should be disconnected and the necessary tools should be possessed: a flathead screwdriver, a Phillips head screwdriver, and a pair of pliers.

Step 2: The door panel should be detached from the front of the appliance. The Phillips head screwdriver should be utilized to unscrew the fasteners securing the door panel.

Step 3: Subsequently, the W10445975 Whirlpool Dishwasher Wash Pump to Sump Hose should be identified. This component should be attached to the rear of the dishwasher or positioned near the bottom of the sump region. The hose should be carefully detached from the pump using the flathead screwdriver and pliers.

Step 4: After the hose has been removed, a measurement of the new hose should be taken and it should be trimmed to the appropriate length (with the pliers).

Step 5: The new hose should be secured to the pump utilizing the two clamps provided in the kit. It should ensure that the clamps are firmly in place and that the connections are snug.

Step 6: The hose should be reattached to the sump area and any signs of leaks should be inspected.

Step 7: Lastly, the door panel should be reassembled and the power should be turned back on to the dishwasher.

Well done! The W10445975 Whirlpool Dishwasher Wash Pump to Sump Hose with 2 Clamps has been successfully replaced by you.

Please be aware that these instructions serve as general guidance and should always be followed alongside the manufacturer's manual, if accessible.