Sharp RV-MZA377WRZZ Microwave Oven Magnetron

$77.26
In stock
Available Quantity:   18
SKU
RV-MZA377WRZZ

Product Description

The Sharp RV-MZA377WRZZ Microwave Oven Magnetron produces a type of frequency that can be used to warm and cook food through electrical conversion of energy. Located in the middle of the inside chamber of the microwave, this high-frequency appliance converts the electrical power supplied to it into oscillating microwaves, which are then passed uniformly around the cavity to cook the food. It is placed inside the closed compartment, and it provides the same performance in models.
Manufacturer
https://www.hnkparts.com/media/catalog/product/r/v/rv-mza377wrzz-90265.jpg

This Part Fits the Following Models (88)

Sharp MICROWAVE OVEN 0.9 CFT R3A66 Sharp MICROWAVE OVEN 0.9 CFT R3A85 Sharp MICROWAVE OVEN 0.9 CFT R7A95 Sharp MICROWAVE OVEN, 0.9 CFT. R3A37 Sharp MICROWAVE OVEN, 0.9 CFT. R3A57 Sharp MICROWAVE OVEN, 0.9 CFT. R3A87 Sharp MICROWAVE OVEN,0.9 CFT,HOMEUSE R3A38 Sharp 1.0 Cft Commercial Micro Oven R21JC Sharp 1.0 Cft Commercial Micro Oven R21JV Sharp HOMEUSE MICROWAVE OVEN 1.5 CFT R930AKF Sharp HOMEUSE MICROWAVE OVEN 1.0 CFT R320BK Sharp HOMEUSE MICROWAVE OVEN 1.0 CFT R330AK Sharp HOMEUSE MICROWAVE OVEN 1.0 CFT R330AW Sharp HOMEUSE MICROWAVE OVEN 1.0 CFT R330BK Sharp HOMEUSE MICROWAVE OVEN 1.0 CFT R390AK
Showing 1-15 of 88
Write Your Own Review
You're reviewing:Sharp RV-MZA377WRZZ Microwave Oven Magnetron
Your Rating
Customer Questions
What maintenance is required for the Sharp RV-MZA377WRZZ Magnetron?

Ensure ventilation pathways remain unobstructed to prevent overheating during operation. Keep the interior cavity clean to reduce strain on the component. Verify electrical connections are secure. Monitor heating consistency to detect irregularities that may indicate performance concerns.

What are common issues with the Sharp RV-MZA377WRZZ Magnetron?

  • Food not heating evenly.
  • System failing to generate heat.
  • Intermittent heating performance.
  • Unusual buzzing during operation.

Installation Steps

Step1: Unplug the microwave and discharge the capacitor safely before starting.

Step2: Remove the outer cover by unscrewing all rear and side fasteners.

Step3: Locate and disconnect wiring connected to the old magnetron carefully.

Step4: Unscrew and detach the faulty magnetron from its mounting bracket.

Step5: Position the new magnetron and secure it tightly with screws.

Step6: Reconnect wiring, reassemble cover, and test heating performance safely.