Toggle Nav
Search
  • 0 My Cart
Toggle Nav
main product photo

Samsung DG94-03446A Gas Safety Valve Assembly NX9000T

Be the first to review this product
Special Price $207.33 Regular Price $270.40
In stock
Available Quantity:   62
SKU
DG94-03446A

Product Description

The Samsung DG94-03446A Range Gas Safety Valve Assembly NX9000T is installed in a residential gas appliance to regulate and control the flow of gas to the burner system to provide proper ignition and flame operation. This part is the main gas distribution system, which opens and closes the gas route automatically under the control of the appliance. It works by sending an electrical signal to the control board, which switches the solenoid valve on the assembly.
Add to Wish List
Stove & Oven Parts, Gas Valves,
Manufacturer
https://www.hnkparts.com/media/catalog/product/d/g/dg94-03446a-1.jpg

This Part Fits the Following Models (36)

Showing 1-15 of 36
Write Your Own Review
You're reviewing:Samsung DG94-03446A Gas Safety Valve Assembly NX9000T
Your Rating
FAQS
Customer Questions
What maintenance is required for the Samsung DG94-03446A Gas Safety Valve Assembly?

Regularly inspect the valve assembly for gas leaks, corrosion, or loose connections. Keep surrounding components clean and free of debris to ensure proper operation. Periodically check fittings for tightness and proper alignment. Always turn off gas supply before servicing for safety.

What are common issues with the Samsung DG94-03446A Gas Safety Valve Assembly?

  • Gas flow interruptions or inconsistent supply issues.
  • Failure to open or close properly.
  • Gas leaks due to worn seals.
  • Clicking without ignition response.
  • Valve sticking or delayed activation.

Installation Steps

Step1: Turn off gas supply at main shutoff and unplug the range to prevent leaks or electric shock.

Step2: Carefully remove rear panel and disconnect old valve wiring and gas line.

Step3: Install new valve assembly securely, ensuring correct alignment and fittings per manufacturer specification.

Step4: Reconnect wiring and gas line, tighten connections and ensure secure fit.

Step5: Restore gas and power, test for leaks with soapy water and verify ignition before use.