Toggle Nav
Search
  • 0 My Cart
Toggle Nav
main product photo

Samsung DD92-00059B Dishwasher Main PCB Assembly

Be the first to review this product
Special Price $77.45 Regular Price $89.95
In stock
Available Quantity:   10
SKU
DD92-00059B

Product Description

The Samsung DD92-00059B Dishwasher Main PCB Assembly is the electronic control board that is used to coordinate all the primary operating functions. The board operates by receiving input signals through sensors and sending power to the components that include pumps, motors and valves. It is normally fitted into a closed container behind the base and it has to be handled with care during installation. It is well operated for efficient performance, uniform cleaning performance, and accuracy over an extended time.
Add to Wish List
Dishwasher Parts, PCBs,
Manufacturer
https://www.hnkparts.com/media/catalog/product/i/m/image.png

This Part Fits the Following Models (4)

Write Your Own Review
You're reviewing:Samsung DD92-00059B Dishwasher Main PCB Assembly
Your Rating
FAQS
Customer Questions
What maintenance is required for the Samsung DD92-00059B Main PCB Assembly?

Ensure all connectors are seated properly and the board surface remains dust-free. Confirm buttons register commands immediately. Verify that wash cycles run correctly, all functions respond accurately, and transitions between programs operate smoothly without interruption during daily use.

What are common issues with the Samsung DD92-00059B Main PCB Assembly?

  • Cycles not starting properly.
  • Functions responding inconsistently.
  • Commands failing to register.
  • Operations pausing mid-cycle.

Installation Steps

Step1: Shut off electrical power at the circuit breaker before servicing.

Step2: Open the door and remove the inner panel to access the control area.

Step3: Disconnect all wiring connectors from the existing circuit board carefully.

Step4: Remove mounting screws holding the board in its bracket.

Step5: Position the replacement board and secure it firmly into place.

Step6: Reconnect wiring, reinstall the panel, restore power, and run a test cycle.