The Samsung DC97-14370H Washer Flange Shaft Assembly is used to connect the washer drum to the motor to enable it to rotate during washing cycles. Serves to fix the inner drum to the tub in a secure manner to enable the transmission of power from the motor with the least vibrations and noise. This assembly minimize the spinning speed and the vibration, increases the efficiency of washing, and ensures that clothes do not get damaged.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Ensure the washing machine is unplugged before beginning the procedure.
Step 2: A flathead screwdriver should be employed to extract the screws securing the appliance's top corner trim. The trim should be removed and placed aside.
Step 3: The two screws located on the rear of the appliance that secure the rear panel should be identified. A Phillips head screwdriver should be used to loosen these screws. The panel should be lifted away from the appliance and set aside.
Step 4: With a ratchet and socket set, the four bolts should be detached from the flange shaft situated at the bottom left corner of the machine housing.
Step 5: The old flange shaft should be removed from the machine and disposed of.
Step 6: The new replacement Samsung DC97-14370H Assy Flange Shaft should be taken and positioned correctly. It should ensure that it is properly seated and aligned.
Step 7: The four bolts should be reinserted and secured tightly using the ratchet and socket set.
Step 8: The rear panel should be reattached and fastened using the two screws.
Step 9: The top corner trim should be reinstalled and secured with the flathead screws.
Step 10: The power supply should be reconnected to the washing machine, and the task is complete!
The Samsung DC97-14370H Assy Flange Shaft has been successfully swapped.
Please note that these instructions are intended to serve as general guidance and should always be followed alongside the manufacturer's manual, if available.
