Samsung DC33-01010D Washing Machine Water Valve

Special Price $122.21 Regular Price $137.95
In stock
Available Quantity:   36
SKU
DC33-01010D

Product Description

The Samsung DC33-01010D Washing machine water valve regulates the amount of water that enters the appliance during the wash cycles. It works by opening and closing according to the signals of the control board, controlling the water intake to various cycles. It is installed in the back of the washing machine and is linked to inlet hoses and internal plumbing to make sure that the washing machine delivers the proper amount of water and that the washing system functions properly.
Manufacturer
https://www.hnkparts.com/media/catalog/product/d/c/dc33-01010d.jpg

This Part Fits the Following Models (1)

Write Your Own Review
You're reviewing:Samsung DC33-01010D Washing Machine Water Valve
Your Rating
Customer Questions
What maintenance is required for the Samsung DC33-01010D Water Valve?

Periodically check the washing machine valve inlet screens for sediment buildup and clean them to maintain proper water flow. Inspect connections for leaks and ensure secure fittings. Turn off power and water supply before servicing to prevent accidents.

What are common issues with the Samsung DC33-01010D Water Valve?

  • Slow or no water filling during cycles.
  • Washing machine valve stuck open causing continuous water flow.
  • Leaks from worn seals or connections.
  • Inconsistent water temperature due to faulty operation.

Installation Steps

Step1: Safety unplug washer and shut off water supply before starting, ensure machine is cool.

Step2: Remove rear access panel and locate the old inlet water valve assembly.

Step3: Disconnect electrical connector and water hoses carefully, noting positions.

Step4: Install new water valve, align and tighten fittings securely.

Step5: Reattach panel, restore power and water supply, run test cycle to check for leaks.