Toggle Nav
Search
  • 0 My Cart
Toggle Nav
main product photo

Samsung DC29-00006C Dishwasher Electromagnetic Interference Filter

Be the first to review this product
$50.16
In stock
Available Quantity:   5
SKU
DC29-00006C

Product Description

The Samsung DC29-00006C Dishwasher Electromagnetic Interference Filter is an operational noise suppressor product that is installed to minimize the interruption produced when using an appliance. Its function is to block electromagnetic signals of the power supply, so that internal circuits are not disturbed, and other components around it are not affected. The filter operates by absorbing and rerouting undesired electrical noise to sensitive circuits. It is placed on the incoming power line and is located in the control or wiring compartment.
Add to Wish List
Dishwasher Parts, Filters,
Manufacturer
https://www.hnkparts.com/media/catalog/product/d/c/dc29-00006c_1.jpg

This Part Fits the Following Models (14)

Write Your Own Review
You're reviewing:Samsung DC29-00006C Dishwasher Electromagnetic Interference Filter
Your Rating
FAQS
Customer Questions
What maintenance is required for the Samsung DC29-00006C Electromagnetic Interference Filter?

Regularly inspect the filter for signs of wear, damage, or loose connections. Ensure the dishwasher is unplugged before checking or handling the component. Keeping surrounding wiring clean and secure supports to maintain proper operations and reduces electrical interference risks.

What are common issues with the Samsung DC29-00006C Electromagnetic Interference Filter?

  • Electrical noise causing interference with nearby systems.
  • Dishwasher failing to start or intermittent power issues.
  • Burnt or damaged internal components issues.
  • Loose or faulty wiring connections affecting performance.

Installation Steps

Step1: Disconnect power supply of the dishwasher and turn off water before starting.

Step2: Remove the dishwasher’s lower access panel.

Step3: Locate the existing electromagnetic interference filter near the power entry point.

Step4: Disconnect wiring carefully, noting positions.

Step5: Remove mounting screws and take out the old filter.

Step6: Install the new filter, secure with screws.

Step7: Reconnect wires firmly.

Step8: Reassemble panel and restore power.