LG MAP61913707 Washer Rear Tub Ball Bearing is used to support the rotation of the washer drum. It functions to decrease the contact pressure between the drum and the motor shaft so that the drum can rotate freely and smoothly without straining the internal components. This bearing ensures that the washing machine has long durability and also minimizes the vibration by ensuring that the wash cycle is balanced and quiet. It also helps to avoid any harm to the drum and motor, which in turn enhances the efficiency of the machine and its energy use.
Step 1: Prior to starting, your washer should be disconnected from the electrical outlet and the water supply should be shut off to prevent any risk of shock or harm.
Step 2: The agitator and the washer's top should be detached. Depending on your specific model, a standard or Phillips screwdriver may be necessary for this task.
Step 3: The rear panel and the drum support should be removed. This component is secured by several screws located at the back of the appliance.
Step 4: The old LG Washer Rear Tub Ball Bearing should be extracted from the rear tub. Utilizing pliers for this action is acceptable, but care should be exercised to avoid damaging the washer’s exterior.
Step 5: After the old bearing has been taken out, the new MAP61913707 LG Washer Rear Tub Ball Bearing should be placed into position, ensuring it is correctly seated. Confirmation that the speedy is tightened appropriately should be made, but overtightening should be avoided.
Step 6: The drum support and the rear panel should be reattached before the agitator and the top cover are replaced.
Step 7: Lastly, the washer should be reconnected to the power source and the water supply should be restored.
Be aware that these instructions are intended for general reference and should always be utilized alongside the manufacturer's manual, if available.
