Toggle Nav
Search
  • 0 My Cart
Toggle Nav
main product photo

General Electric WB13X40208 Oven Igniter Glowbar

Rating:
5 5 1
1 Review Add Your Review
Special Price $67.28 Regular Price $73.23
In stock
Available Quantity:   158
SKU
WB13X40208

Product Description

The General Electric WB13X40208 Oven Igniter Glowbar is used to start burner combustion by heating it to the required temperature to open the gas safety valve. It generates a regulated light that allows the initiation of gas to continue the fire. Installed close to the burner unit, it is connected to the wiring and mounting bracket of the oven to provide power to the start button. Its functionality assists in the rise of the proper level of heat in the appliance.
Add to Wish List
Stove & Oven Parts, View All Parts,
Manufacturer
https://www.hnkparts.com/media/catalog/product/w/b/wb13x40208.jpg

This Part Fits the Following Models (2)

Write Your Own Review
You're reviewing:General Electric WB13X40208 Oven Igniter Glowbar
Your Rating
FAQS
Customer Questions
What maintenance is required for the General Electric WB13X40208 Igniter Glowbar?

Make sure the igniter terminals are firmly connected. Remove any debris around the burner area that could obstruct ignition. Confirm the igniter glows consistently during startup. Avoid sudden power interruptions to maintain steady oven operation.

What are common issues with the General Electric WB13X40208 Igniter Glowbar?

  • Oven fails to reach set temperature.
  • Ignition delayed.
  • Bake cycles not starting properly.
  • Burner flame uneven.

Installation Steps

Step1: Switch off oven power at breaker for safety.

Step2: Remove oven racks and lower panel to reach igniter.

Step3: Disconnect wiring leads from old glowbar carefully.

Step4: Unscrew igniter assembly and detach from mounting bracket.

Step5: Install new igniter in same position and secure screws.

Step6: Reconnect wiring firmly and reassemble oven components.

Step7: Restore power test ignition cycle ensuring proper heating.