The LG EAU63103204 Evaporator DC Fan Motor is used for circulating the cold air to ensure that it cools the refrigerator as required. Works by passing air over the evaporator coil while at the same time regulating the temperature. This process also helps to avoid the formation of frost and helps in preserving food for longevity. Ensures the performance to improve the cooling capacity and at the same time, decrease energy consumption.
Step 1: The interior of the LG washing machine should be accessed by starting. This is usually achieved by unscrewing the screws from the back or side panels.
Step 2: After gaining access, the current DC motor should be identified and it should be detached from the power supply. Any fasteners securing the motor should be unscrewed and the wiring should be disconnected.
Step 3: The new motor should be taken and set in the same spot as the previous one. The new motor should be fastened using the screws that were taken from the old motor. The wires should be attached to the new motor and secured with wire ties if needed.
Step 4: The washing machine should be reconnected to the power source and the start button should be promptly pressed. The washing machine should operate normally, and the new motor should be working properly. If the washing machine fails to start, the connections should be rechecked and steps 3 and 4 should be repeated.
Your LG washing machine should now be operational with the newly installed DC motor. The washing machine should be closed and the outcome of your successful replacement should be appreciated.
Please remember that these instructions serve as general guidance and should always be referenced alongside the manufacturer's manual, if available.
