The Samsung DD94-01030A Dishwasher D/W Vent Fan Motor is an essential component that increases the efficiency and performance of your dishwasher.. This motor is particularly designed to power the dishwasher's vent fan system, guaranteeing appropriate airflow and ventilation during the dishwashing cycle. By properly removing steam and moisture from the dishwasher, it helps to avoid condensation accumulation and maintain a dry interior, resulting in cleaner and spotless dishes. The motor runs quietly and effectively, fully integrating into the dishwasher's operation and producing no interruption. Its long-lasting and dependable design assures constant performance over time. The Samsung DD94-01030A Dishwasher D/W Vent Fan Motor allows you to enjoy the comfort of a well-functioning dishwasher while assuring excellent results with every.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The dishwasher should be disconnected from the electrical outlet and all power supplies should be disabled.
Step 2: The dishwasher door should be opened and the screws located behind the kick plate that hold the bottom cover panel should be found.
Step 3: Any screws fastening the bottom cover panel should be taken out, then the panel should be gently pulled away to expose the inside of the appliance.
Step 4: The dry duct assembly should be identified and the screws that hold it in place should be taken out. A flathead screwdriver may be needed.
Step 5: The old dry duct assembly should be gently extracted and disposed of.
Step 6: The new dry duct assembly should be positioned into the designated area and fastened with the screws that were previously removed.
Step 7: The power connection should be re-established and the dishwasher should be plugged back in.
Step 8: The power should be activated and the dishwasher should be checked to confirm that the new dry duct assembly operates correctly.
Step 9: The bottom cover panel should be reattached and secured with the screws that were taken out earlier.
Step 10: Power should be reinstated to the dishwasher and a test cycle should be conducted to verify that everything functions as intended.
Please be aware that these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.
