The store will not work correctly in the case when cookies are disabled.
We collect user information to provide a better user experience and protect the security of our website. By continuing to use our website, you acknowledge the use of cookies.
The Samsung DC97-04981F Door Boot Spring Clamp is used to hold the seal tightly to avoid any leakage during washing in the washer. This metal clamp is made of metal and has longevity and it is used to hold the boot seal firmly on the washer drum with equal pressure. Ensures that the does not allow water to leak and also reduces the stress on the washer and increases efficiency.
What maintenance is required for the Samsung DC97-04981F Door Boot Spring Clamp?
Check that the clamp remains tightly secured around the door boot. Clean the surrounding area to prevent residue buildup. Confirm the boot is seated correctly and moves freely during cycles. Replace the clamp if it loses tension to maintain proper operation.
What are common issues with the Samsung DC97-04981F Door Boot Spring Clamp?
Door boot slipping out of place.
Water leaking during cycles.
Clamps loosening over time.
Noise during spin cycles.
Installation Steps
Step1: Unplug the washer and open the door.
Step2: Locate the spring clamp around the door boot edge.
Step3: Carefully stretch and remove the old clamp.
Step4: Position the boot evenly around the front panel.
Step5: Fit the new clamp over the groove using tension.
Step6: Ensure a tight seal before restoring power.
