The Samsung DC96-01585D Drain Pump Assembly used for draining water from the washer. This pump works by having a better motor that creates suction and then rapidly ejects the wastewater through the drain hose. Designed to have a smooth interior to avoid blockage of water flow. The beneficial for the proper functioning and prevents leakage and drainage problems. Convenient to install and designed for longevity use, this pump adds value to the washer and provides better cleaning for clothes.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The washing machine is disconnected from the electrical outlet.
Step 2: The water pump is found and the two electrical wires linking it to the washer control panel are detached.
Step 3: The clamp that secures the drain hose is removed, then the hose is extracted from the drain pump housing.
Step 4: The four mounting screws that hold the pump to the washer are taken out and it is lifted away.
Step 5: The new DC96-01585D Samsung Washer Water Drain Pump is positioned and it is fastened using the four mounting screws that were previously taken out.
Step 6: The drain hose is reattached and the clamp is secured.
Step 7: The wires are reconnected to the pump and back to the washer control panel.
Step 8: The washer is activated by switching it on and initiating a cycle.
Step 9: After the cycle finishes, the washer is unplugged and the discharge hose is inspected for any leaks. The clamps are adjusted if needed.
Please remember, these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.
