The Samsung DC66-00887A Pulsator Cap is a small but critical replacement part for Samsung washing machines. There's a plastic cover that fits over the pulsator of the washing machine, which rotates and agitates the clothes while the cycle is running. This seemingly straightforward cap has several uses. This protects the pulsator from normal wear and tear, shielding it from dings and scratches that can impair its operation. A broken pulsator cap can also grab on clothing and cause rips. Maintaining the condition of the cap will guarantee that your clothes remain safe from rips and snags. Also, improved washing performance is a result of a pulsator cap operating properly. The pulsator's capacity to adequately agitate the clothing may be hampered by a damaged cap, which could result in uneven washing or residual dirt and soap.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Prior to commencing, it should ensure that the washer’s power is switched off. This can be achieved by detaching the power cord from the outlet.
Subsequently, the water supply should be turned off and the hoses should be disconnected from the rear of the washer. The hoses must be removed from both the hot and cold water inlet valves.
Step 2: The pulsator cap should be identified, which should be positioned at the center of the washer tub. Four screws will be securing the cap in place.
The screws should be extracted and then the pulsator cap should be carefully elevated out of the washer.
Step 3: The new pulsator cap should be inserted into the opening in the washer tub. It should ensure that the cap is correctly positioned so that all four screws can be reinserted.
The cap should be fastened by tightening the four screws.
Step 4: The water supply hoses should be reattached to the washer, ensuring they are linked to the hot and cold water valves.
Finally, the power cord should be reconnected to the outlet.
Your washer is now prepared for use again. It’s that easy!
Please be aware that these directions should serve as general guidance and should always be utilized alongside the manufacturer's manual, if one is available.
