Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The exhaust fan should be switched off and all power supplies to the stove should be detached. If the Brown Stove is gas-operated, the gas valve should be turned off.
Step 2: The back plate should be unscrewed and taken off from the stove, if present.
Step 3: The burner grates and any other accessible components should be taken out.
Step 4: The old stove should be gently lifted out. Assistance should be ensured, as it will be quite heavy.
Step 5: The new stove should be positioned into the space where the old one was located. It should ensure that it is level.
Step 6: The back plate should be reattached if present.
Step 7: The new stove should be fastened to the floor or countertop using the screws supplied.
Step 8: The burner grates, knobs, and other components should be reinstalled.
Step 9: The gas valve should be activated if applicable.
Step 10: The power supply should be reconnected. The exhaust fan should be switched on and the stove should be tested.
Please note that these instructions are served as general guidance and should always be followed alongside the manufacturer's manual, if available.
