The LG AJK72989704 Washer Suspension Assembly is a stabilizer of the appliance drum on the fly to minimize noise, vibration, and excessive movement to facilitate a smoother and quieter operation. It operates by taking the shock and counterbalancing the load as the drum turns, so that the washer is efficient and does not destroy internal parts. It is a direct replacement and can be firmly fitted in compatible LG washing machines to re-establish the correct level of drum support performance.
Step 1: Prior to initiating the replacement of your LG Washer Suspension Assembly (AJK72989704), it should ensure that the necessary replacement components and tools are at hand. The new suspension assembly, a Phillips head screwdriver, and a pair of pliers will be required.
Step 2: The washer should be disconnected from the electrical outlet. Subsequently, the two screws located at the rear of the washer where the suspension assembly is affixed should be identified. The screws should be taken out using the Phillips head screwdriver, and then the old suspension assembly should be extracted.
Step 3: The openings at the back of the washer for the suspension assembly installation should be identified. The new suspension assembly should be inserted into these openings and then the screws should be secured back in place using the Phillips head screwdriver.
Step 4: After ensuring the screws are secure, the washer should be reconnected to the electrical outlet and powered on. It is essential for the functionality of the new suspension assembly to be verified to confirm it is operating correctly. If everything is functioning as expected, the new suspension assembly is now active, and the replacement has been successfully completed.
It is important to remember that these instructions are to be served as general guidance and should always be referenced alongside the manufacturer’s manual, if available.
