The LG AGZ72909711 Washer Pulsator Assembly rotates water and dirty clothes to a controlled spin to increase cleaning effectiveness. It causes clothes to tumble in both directions, which causes a turbulent flow of water that loosens dirt and spreads detergent evenly.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: The washer should be disconnected from the electrical outlet and ensured to be devoid of water, laundry, and detergent.
Step 2: The top panel of the washing machine should be detached with a wrench. This panel is situated at the rear of the washer and is fastened by two screws.
Step 3: Subsequently, the tub paddle should be taken off by loosening the four screws surrounding it.
Step 4: The old LG Washer Pulsator Assembly AGZ72909711 should be gently extracted from the washer and disposed of.
Step 5: Now, the new LG Washer Pulsator Assembly AGZ72909711 should be inserted into the same position as the previous one.
Step 6: The tub paddle should be reattached and fastened with the four screws.
Step 7: The top panel should be repositioned and secured with the two screws.
Step 8: The washer should be reconnected to the power source and you’re finished!
Be aware that these guidelines are served as general advice and should always be utilized alongside the manufacturer's manual, if accessible.
