The LG ADX73550627 Door-Gasket Assembly is used for the proper functioning of the refrigerator. This gasket is intended to fit around the door and ensures that cold air does not leak out and warm air does not come. The gasket is made of a flexible rubber material when the door is closed it better fits into the door frame. This process assists in controlling the internal temperature the load on the compressor is minimized the energy used is also minimized.
Step 1: The refrigerator should be disconnected from the power source or the unit should be unplugged.
Step 2: The door should be shut and masking tape should be applied to hold the door gasket against the door. This will keep the door securely closed.
Step 3: With a Phillips screwdriver, the screws should be detached from the gasket frame to take off the old gasket assembly.
Step 4: The new gasket assembly (ADX73550627) should be positioned in place. The screws should be reinserted to secure it.
Step 5: The masking tape should be peeled off and it should be verified that the gasket is tightly sealed against the door.
Step 6: The refrigerator should be reconnected to the power source or it should be plugged in.
Step 7: The new gasket assembly should be assessed by shutting the door and inspecting for any air leaks.
Please be aware that these instructions are served as general guidance and should always be utilized alongside the manufacturer’s manual, if available.
