The LG ADD74236501 Refrigerator Door-Foam Assembly plays a role of insulating the door to make the refrigerator energy efficient. It is installed on the doors to ensure that the cold air does not enter the room while warm air does not escape hence regulating the internal temperature. This improves on the cooling efficiency, minimizes energy use and prolongs the shelf-life of the food products.
Step 1: The refrigerator should be disconnected from its power supply. To prevent any risk of electrical shock or harm, it is crucial for the appliance to be disconnected initially before commencing any repairs.
Step 2: The door should be detached from the refrigerator by unscrewing the screws located on the hinge side. After all screws have been removed, the door should be carefully pulled away from the refrigerator.
Step 3: The current foam assembly should be identified, which can be found within the door's housing at the top and bottom sections.
Step 4: The foam assembly should be extracted from the door by taking out the screws securing it in place. It is essential for the location of each screw to be remembered to facilitate easy reinstallation once the foam assembly has been swapped.
Step 5: The new ADD74236501 foam assembly should be inserted into the door housing. It should ensure that the holes are aligned correctly so that the screws can be reinserted effortlessly.
Step 6: The new foam assembly should be fastened in position using the screws that were previously removed.
Step 7: The door should be reattached to the refrigerator using the screws taken out in step 2.
Step 8: Your refrigerator should be reconnected to the power outlet, and you are finished.
Please note, these instructions serve as general guidance and should always be referenced alongside the manufacturer's manual, if available.
