Fisher & Paykel 818980P Refrigerator Defrost Heater Pure 120v 790 Kit

Special Price $153.28 Regular Price $190.98
In stock
Available Quantity:   5
SKU
818980P

Product Description

The Fisher & Paykel 818980P Refrigerator-Defrost Heater Kit 120V 790 is effective in melting the frost on the evaporator coils to operate better in cooling. This runs on a 120V power supply and is turned on during defrost cycles to keep ice growth off the coils which can improve airflow and decrease efficiency. The kit is compatible with specific refrigerators and provides better temperature control by facilitating the defrost process.
Manufacturer
https://www.hnkparts.com/media/catalog/product/8/1/818980p_fisher--paykel3_hnkparts_1.png

This Part Fits the Following Models (39)

Fisher & Paykel E521TLM-21694A Refrigerator Fisher & Paykel E521TLX-21696A Refrigerator Fisher & Paykel E521TRM-21693A Refrigerator Fisher & Paykel E521TRX-21695A Refrigerator Fisher & Paykel E522 Refrigerator Fisher & Paykel E522A Refrigerator Fisher & Paykel E522A-21637A Refrigerator Fisher & Paykel E522A-21638A Refrigerator Fisher & Paykel E522A-21639A Refrigerator Fisher & Paykel E522A-21640A Refrigerator Fisher & Paykel E522A-21767A Refrigerator Fisher & Paykel E522BRT-21925D Refrigerator Fisher & Paykel E522BRT-21925E Refrigerator Fisher & Paykel E522BRX-21639A Refrigerator Fisher & Paykel E522BRX-21639E Refrigerator
Showing 1-15 of 39
Manufacturer Name: FISHER & PAYKEL3
Product Number: 818980P
OEM Part Number: 818980P
Product Description: Kit Htr Def Pur 120V 790

Choose the best Home Appliance parts and supplies from HnKParts!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)723-0907 or [email protected]

Write Your Own Review
You're reviewing:Fisher & Paykel 818980P Refrigerator Defrost Heater Pure 120v 790 Kit
Your Rating
Customer Questions
No Questions

Installation Steps

Step 1: The power cord should be disconnected from your Fisher & Paykel dryer and the gas supply valve should be turned off, if relevant.

Step 2: The top cover of the dryer should be taken off by elevating it and pulling it backward.

Step 3: The heating element should be identified, situated at the bottom of the dryer, concealed by a protective cover.

Step 4: The screws fastening the protective cover should be removed and the cover should be detached.

Step 5: The wiring harnesses should be unplugged and the two hex nuts securing the heating element should be unscrewed.

Step 6: The old heating element should be extracted from the dryer.

Step 7: The new heating element (818980P) should be thoroughly examined for any defects or damage.

Step 8: The new heating element should be positioned where the old one was and reattached using the two hex nuts.

Step 9: The wiring harnesses should be reconnected.

Step 10: The protective cover should be reinstalled and secured with the screws.

Step 11: The power cord should be inserted into a suitable outlet and the gas supply valve should be activated, if applicable.

Step 12: It should be verified that the dryer is functioning properly.

Please remember that these instructions should be served as general guidance and should always be referenced alongside the manufacturer's manual, if one is available.