Step 2: A Phillips screwdriver should be utilized to take out the screws located at the front of the cabinet, then the cabinet should be carefully pulled off, ensuring the exterior of the dryer remains undamaged during this process.
Step 3: The idler arm secures the dryer belt, so a flathead screwdriver should be employed to loosen the two screws that secure the idler arm. After the screws are removed, the idler arm can be slid off the dryer.
Step 4: With the idler arm removed, the old belt should be easily detached.
Step 5: Next, your new 804985 Speed Queen micro V drive belt should be taken and the ends positioned over the motor pulley and drum. Pliers should be used to firmly secure the belt.
After the belt is properly positioned, the idler arm should be reattached by threading the screws back into their original positions. Finally, the cabinet should be placed back on and the screws replaced.
Well done! The 804985 Speed Queen dryer micro V drive belt has been effectively substituted. Now, your dryer should be reconnected and its service enjoyed for many years ahead.
Please remember, these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.
