Step 1: Are you preparing to swap out your Speed Queen 803976 Hose Drain-WHT Plastic (NDEP)? If so, this DIY instruction set will guide you through the procedure.
Step 2: To start, all required tools and materials for this task should be collected. Replacement hoses, a Phillips head screwdriver, adjustable pliers, and a flathead screwdriver will be needed.
Step 3: Next, the process should be initiated by switching off the power to the washing machine and detaching the power cord from the wall outlet.
Step 4: Now, it’s essential for the washing machine to be readied for the hose swap. The front panel should be taken off by unscrewing the screws located on both sides of the panel. The panel should be carefully placed aside. Using the adjustable pliers, the clamps that hold the hoses to the inlet valve should be detached. Lastly, the hose should be extracted from the inlet valve.
Step 5: After the hoses have been removed, the new hoses should be taken and installed. It should ensure that the hoses fit securely into the inlet valve and then they should be fastened with the clamps.
Step 6: In closing, the front panel should be reattached and fastened with the screws. Once completed, the power cord may be reconnected and the power restored.
Step 7: Well done! The Speed Queen 803976 Hose Drain-WHT Plastic (NDEP) has been successfully swapped.
Please be aware that these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if available.
