Whirlpool 56000 Dryer Blower Wheel

Special Price $56.47 Regular Price $77.30
In stock
Available Quantity:   125
SKU
56000

Product Description

The Whirlpool 56000 Dryer Blower Wheel maximizes airflow in the part and makes the appliance process quicker, more efficient, and prevents overheating of the appliance. It is compatible with all Whirlpool dryers to provide consistency in performance, reduce the time spent drying.
10.6"X14"X1.5"
Manufacturer
https://www.hnkparts.com/media/catalog/product/5/6/56000-12946.jpg

This Part Fits the Following Models (1091)

Maytag MDG308DAWW Dryer Maytag PDGT920AWW Electric Dryer Maytag PDET910AYW Electric Dryer Maytag PDET910AZW Dryer Maytag PDET920AYW Electric Dryer Maytag PDET920AZW Dryer Maytag PDGT910AWW Dryer Maytag MDG2706AGW Dryer Maytag MDG2706AWW Dryer Maytag MDG270SAWW Dryer Maytag SDG4606AWW Dryer Maytag SDG505DAWW Dryer Maytag SDG505DAWQ Electric Dryer Maytag SDG505DAXW Dryer Maytag SDG515DAWW Dryer
Showing 1-15 of 1091
ASSEMBLY - BLOWER FAN
Write Your Own Review
You're reviewing:Whirlpool 56000 Dryer Blower Wheel
Your Rating
Customer Questions
No Questions

Installation Steps

Step 1: The unit should be disconnected from the outlet and the power should be deactivated at the circuit breaker.

Step 2: The motor wiring should be detached by pulling off the leads. The mounting screws that secure the motor to the cabinet should be unscrewed.

Step 3: The blower wheel should be extracted. Depending on your specific model, the wheel might just need to be unscrewed, or a pair of pliers may have to be utilized.

Step 4: The blower wheel shaft should be scrubbed with a wire brush to eliminate any dirt or debris.

Step 5: The blower wheel should be examined for any signs of damage. If any are found, the blower wheel must be replaced.

Step 6: The new blower wheel should be positioned. The mounting holes should be aligned carefully and the wheel should be fastened using the screws.

Step 7: The motor wiring should be reconnected and the leads should be attached again.

Step 8: The motor should be placed back and secured using the mounting screws.

Step 9: The power should be reactivated at the circuit breaker and the unit should be reconnected to the outlet.

Step 10: The unit should be verified to ensure that the blower wheel operates correctly.

Please remember, these directions are intended for general assistance and should always be utilized alongside the manufacturer's manual, if one is available.