Frigidaire 5304479791 Wine Cooler Bracket

Step 1: The Frigidaire wine cooler should be disconnected from its power supply.

Step 2: Using a Phillips-head screwdriver, the screws found at both the top and bottom of the wine cooler door should be removed. After all screws have been taken out, the door should be lifted from the cooler and placed aside.

Step 3: Employing a wrench, the screws that hold the previous door switch bracket in position should be loosened.

Step 4: The old door switch bracket should be detached from the cooler and disposed of.

Step 5: The new 5304479791 Frigidaire Wine Cooler Door Switch Bracket should be taken and inserted into the slot where the previous one was situated.

Step 6: The new switch bracket should be fastened using the mounting screws, with them being tightened with a wrench.

Step 7: The door should be reattached to the cooler and secured with the screws.

Step 8: The wine cooler should be reconnected to the power source.

Your Frigidaire wine cooler is now set for use. Enjoy!

Please be aware that these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.