Step 1: Your washer should be disconnected from the power source and the water supply should be shut off.
Step 2: The current 5215FD3715L LG Washer water inlet fill hose should be detached from the water inlet valve and taken out from the washer.
Step 3: The old hose should be thoroughly examined for any signs of cracks or leaks. If needed, any other hoses that require replacement should be substituted while the 5215FD3715L LG Washer water inlet fill hose with 90 degree elbow is being installed.
Step 4: The new 90 degree elbow should be positioned into the water inlet valve.
Step 5: The new 5215FD3715L LG Washer water inlet fill hose should be attached to the 90 degree elbow. All connections should be ensured tight.
Step 6: The water supply should be reactivated and the washer should be reconnected to the power.
Step 7: Any indications of leaks should be inspected. If no leaks are detected, the installation is complete.
Please note, these instructions are served as general guidance and should be utilized alongside the manufacturer's manual, if available.
