The LG 4681EA1009C Washer AC Motor Clutch Assembly operates the connection between the motor and the appliance drum to control spin and agitation. It works by connecting and breaking the connection of the motor and the drum when required, and makes sure that the motor and the drum work when the wash is going on. It is placed in the internal drive system of the washer that is fitted to the motor and drum, which provides it with an operation.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Your air conditioner should be switched off and disconnected from the wall outlet.
Step 2: The screws should be taken out from the outer panel of the unit, utilizing your Phillips head screwdriver.
Step 3: The panel should be removed, and the motor assembly should be identified, which should be positioned near the center of the unit.
Step 4: Your flathead screwdriver should be employed to loosen the mounting screws for the motor assembly.
Step 5: The old motor assembly should be gently detached from the unit, and placed aside.
Step 6: The new LG AC Motor Assembly (part number 4681EA1009C) should be inserted. It should ensure that the mounting screws are securely fastened.
Step 7: The outer panel should be reattached to the unit, confirming that the screws are tightened properly.
Step 8: The air conditioner should be reconnected to the wall outlet and switched back on.
Congratulations! Your LG AC Motor Assembly (model 4681EA1009C) has been successfully replaced. That was simple, wasn’t it?
Please remember that these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if it is available.
