The FRIGIDAIRE 316475806 Range Control Board Assembly controls the temperature and other settings of the oven for effective cooking and baking. It works through the control panel, inputs the desired commands, and sends electrical signals to the heaters that need to be activated. It is designed to be integrated into other components, it is able to communicate effectively with other components to ensure its efficiency.
Please, mind that only logged in users can submit questions
Installation Steps
Step 1: Prior to swapping the 316475806 Frigidaire Wall Oven Board Assembly, it should ensure that the power is deactivated at the circuit breaker. Any electrical connections linked to the board should be detached.
Step 2: The oven door and panel should be taken off to reach the board. Depending on your specific oven model, this may require screws to be unscrewed or clips to be unclipped.
Step 3: The screws securing the board in position should be removed. It should be gently taken out and set aside.
Step 4: The new board should be placed in the identical location as the previous one. The board should be fastened using the supplied mounting screws.
Step 5: The wires should be reattached to the board. The board’s installation instructions should be consulted if needed.
Step 6: The oven door and panel should be reinstalled back to their original positions.
Step 7: The power should be reactivated at the circuit breaker. The oven should be verified to operate correctly.
Please note that these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if available.
