The store will not work correctly in the case when cookies are disabled.
We collect user information to provide a better user experience and protect the security of our website. By continuing to use our website, you acknowledge the use of cookies.
The Frigidaire 297110400 Refrigerator Thermistor monitors internal temperature by varying electrical resistance in response to thermal conditions, enabling proper control of cooling operations. It is mounted in the refrigerator area, in the vicinity of the evaporator or air channel that it is connected with the circulating air, and is wired to the main control board via a wiring harness. The thermistor is set up as a temperature-dependent resistor with fixed feedback. It can maintain the temperatures at a constant point through the transmission.
Step 1: The refrigerator is disconnected from the wall socket and the water supply for the ice maker is deactivated.
Step 2: The thermostat situated on the interior ceiling of the refrigerator is found. It appears as a circular, black disc embedded in the ceiling, with two wires attached.
Step 3: Needle nose pliers are utilized to detach the two wires linked to the thermostat.
Step 4: The screws securing the thermostat are extracted, employing a Phillips head screwdriver.
Step 5: The old thermostat is taken out from the refrigerator's ceiling.
Step 6: The new Frigidaire 297110400 THERMISTER is positioned by inserting it into the same opening from which the old thermostat was taken.
Step 7: The new thermostat is fastened using the screws removed previously.
Step 8: The two wires are reattached to the newly installed thermostat.
Step 9: The water supply for the ice maker is reactivated.
Step 10: The refrigerator is reconnected to the wall socket.
Please remember that these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if available.
