Whirlpool 285671 Washer Lid Switch Assembly

Special Price $7.98 Regular Price $39.86
In stock
Available Quantity:   258
SKU
285671

Product Description

The Whirlpool 285671 Washer Lid Switch Assembly is a safety switch found in Whirlpool. It serves as a key safety feature, preventing the washer from working while the lid is open. The washer's control board receives a signal from the switch that indicates it is safe to start the washing cycle when the lid is closed. By doing this, mishaps and injuries that can result from the washer spinning or agitating while the lid is open are avoided. A malfunctioning lid switch can cause a number of problems, such as the washer not starting or halting in the middle of the cycle. Replacing a broken lid switch with a new Whirlpool 285671 Washer Lid Switch Assembly can help your washing machine run properly and safely.

Manufacturer
✓ This Product Replaces: 3352629, 3352630, 3352631, 3352632, 3352634, 3355808, ES671
https://www.hnkparts.com/media/catalog/product/2/8/285671_whirlpool_hnkparts_1.jpg

This Part Fits the Following Models (1091)

DR Power Self Propelled Walk-Behind 11.50 fpt Leaf and Lawn Vacuum Roper AL6245VW1 Washer Roper AX5133VW1 Washer Roper AX6245VW1 Washer Roper RAX5133AW0 Washer Roper RAB3121EW0 Washer Roper RAB3132EW0 Washer Roper RAB4132AL1 Washer Roper RAB4132AW1 Washer Roper RAB4232DL0 Washer Roper RAB4232EN0 Washer Roper RAB5133DW0 Washer Roper RAB5232EW0 Washer Roper RAK2751KQ0 Washer Roper RAL5144AW0 Washer
Showing 1-15 of 1091
Manufacturer Name: Whirlpool
Product Number: 285671
OEM Part Number: 285671
Product Description: Lid Switch & Harness Assy

Choose the best Home Appliance parts and supplies from HnKParts!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)723-0907 or [email protected]

Write Your Own Review
You're reviewing:Whirlpool 285671 Washer Lid Switch Assembly
Your Rating
Customer Questions
No Questions

Installation Steps

Step 1: The washing machine should be disconnected from its electrical outlet.

Step 2: The two screws positioned at the rear of the lid should be taken out.

Step 3: The flat-head screwdriver should be utilized to detach the plastic cover over the lid switch assembly.

Step 4: The nut driver should be taken to loosen the two screws securing the lid switch assembly.

Step 5: The old lid switch assembly should be extracted and disposed of.

Step 6: The new 285671 Whirlpool Lid Switch Assembly should be placed and fastened with the two screws using the nut driver.

Step 7: The plastic cover that was previously removed should be reattached and the two screws should be reinserted into the trough.

Step 8: The machine should be reconnected to the power source and a test should be conducted to verify that the lid switch assembly is operating correctly.

Please note that these instructions serve as general guidance and should always be utilized alongside the manufacturer’s manual, if one is available.