Whirlpool 285219 Washer Suspension Pad Kit

$15.16
In stock
Available Quantity:   105
SKU
285219

Product Description


Whirlpool 285219 Washer Pad-Suspension refers to a set of three suspension pads. These pads are crucial for absorbing vibrations and maintaining the balance of the washing tub during spin cycles. Worn-out pads can cause excessive noise, shaking, and uneven wear.

Manufacturer
https://www.hnkparts.com/media/catalog/product/2/8/285219_whirlpool_hnkparts.jpg

This Part Fits the Following Models (1158)

Admiral ATW4475XQ0 Washer Admiral 2DATW4305TQ0 Washer Admiral 3RATW3005TQ0 Washer Admiral ATW4471TQ0 Washer Admiral ATW4300TQ0 Washer Admiral ATW4470TQ0 Washer Admiral 3UATW4605TQ0 Washer Admiral 4KATW4605TQ0 Washer Admiral ATW4475TQ0 Washer Admiral ATW4475VQ0 Washer Admiral ATW4475VQ1 Washer Admiral 3RATW3005TQ1 Washer Crosley CAWX700MQ0 Washer Crosley CAWX629JQ0 Washer Crosley CAWX629JQ1 Washer
Showing 1-15 of 1158

Whirlpool Washer Pad-Suspension 3 Per Pkg 285219

The Whirlpool Washer Pad-Suspension 3 Per Pkg 285219 is a crucial component designed to ensure the smooth and efficient operation of your washing machine. To create a more peaceful laundry experience, these pads are positioned to absorb vibrations and lessen noise throughout the wash cycle. The Whirlpool Washer Pad Suspension is made to last thanks to its sturdy construction, providing your appliance with long-term stability and support. These pads assist in keeping your washer from shifting or moving too much, which could harm the appliance or the surroundings. These pads protect your flooring from damage and lessen the aging process of your appliances by reducing vibrations.

Key Features for Whirlpool Washer Pad-Suspension 3 Per Pkg 285219:

  • Absorbs vibrations to reduce noise

  • Helps prevent the washing machine from shifting or moving excessively

  • Durable materials for long-lasting performance

 

Write Your Own Review
You're reviewing:Whirlpool 285219 Washer Suspension Pad Kit
Your Rating
Customer Questions
No Questions

Installation Steps

Step 1: The power is disconnected and the washer is drained. It is ensured that no moisture remains in the washer.

Step 2: The washer lid is raised to gain access to the suspension plates situated at the rear of the drum.

Step 3: The three damaged friction pads that require replacement are identified.

Step 4: The damaged friction pads are extracted by employing a flathead screwdriver to unscrew the fasteners holding them in place.

Step 5: A pair of work gloves is worn to safeguard hands from any sharp surfaces.

Step 6: The new friction pads are retrieved and positioned where the old ones were removed.

Step 7: The new friction pads are fastened using the screws.

Step 8: The washer's operation is verified to confirm that the newly installed pads function correctly.

Step 9: The washer is reconnected to power and loaded with laundry.

Step 10: A test cycle is initiated to ensure the proper functioning of the suspension plate friction pads.

It is borne in mind that these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.