The Frigidaire 136601901 Lint-Filter is used to collect the lint, fibers, and debris generate when drying clothes in the dryer. This filter is designed with the hot air passes through the drum and collects the unwanted particles ensuring that they do not block the exhaust vent. The fine mesh design to allow proper air circulation within the dryer while at the same time trapping lint to eliminate the risk of fire. The filter ensures that vent system is always clear to enable the dryer to work at optimal efficiency.
Step 1: Your tools and materials should be collected. A Phillips head screwdriver, a replacement 137006200 latch, and a small flat-head screwdriver will be required.
Step 2: The freezer door should be opened and the screws located on the side of the door frame should be identified. The latch is secured by these screws.
Step 3: Your Phillips head screwdriver should be employed to unscrew and take out the screws.
Step 4: The old latch should be carefully extracted, ensuring that the adjacent components are not harmed.
Step 5: The new latch should be placed into the same position where the old latch was installed.
Step 6: The latch should be fastened using the original screws.
Step 7: The latch should be checked to confirm that it is tightly secured.
Step 8: The freezer door should be closed and it should be verified that the latch keeps it firmly shut.
Please remember, these guidelines are intended for general assistance and should always be utilized alongside the manufacturer's manual, if it is available.
