General Electric WH03X32158 Washer Speed Sensor

Product Overview:

Monitors the rotational speed of the washer's drive motor and provides electronic feedback to the appliance control system. The General Electric WH03X32158 Washer Speed Sensor detects changes in motor rotation through its sensing element and transmits corresponding signals through the electrical connection. The control board uses this information to monitor motor speed during agitation and spin stages. Its sensing interface forms part of the washer's motor-control circuit, helping the electronic system track rotational conditions as the selected cycle progresses.

Motor Speed Sensing:

The speed sensor detects rotational movement from the washer's drive motor and converts that movement into electronic feedback for the control system. As motor rotation changes, the sensor provides corresponding speed information that allows the electronic controls to monitor the drive system's operating condition. This feedback is particularly relevant during stages where the motor operates at different speeds or transitions between rotational states.

Cycle Coordination:

The washer's electronic controls use motor speed feedback during agitation and spin stages to monitor changes in drive-motor rotation. The control system receives the sensor signal and evaluates the motor's rotational condition as the selected cycle progresses. This provides continuous speed information to manage motor-driven portions of the programmed wash sequence.

Replacement Guidelines:

Replacing the Washer Speed Sensor is appropriate if it is damaged, malfunctioning, excessively worn, or otherwise deteriorated. Verify part number WH03X32158 and the complete washer model number before replacement. Replace the sensor if deterioration affects speed sensing, motor-related signal feedback, washer cycle operation, or normal appliance performance.

Common Failure Symptoms:

• Washer does not reach the intended spin speed.
• Agitation cycle does not operate as expected.
• Spin cycle stops prematurely or does not begin.
• Wash cycle pauses unexpectedly.
• Motor-related error codes on applicable models.
• Inconsistent motor speed during operation.

Equipment Compatibility:

The GENERAL ELECTRIC WH03X32158 Washer Speed Sensor is intended for equipment that specifies part number WH03X32158. Verify the complete washer model number and manufacturer's parts documentation before purchasing to help confirm the correct application.

Technical Specifications:

Product Name: Speed Sensor

Part Number: WH03X32158

Brand: General Electric

Appliance Type: Washer

Step1: Unplug the washer from the electrical outlet to ensure safety.

Step2: Move the washer slightly forward and remove the rear access panel.

Step3: Locate the speed sensor near the motor or drive assembly.

Step4: Disconnect the wiring connector from the old sensor.

Step5: Install the new speed sensor and tighten the mounting screw.

Step6: Reinstall the panel, restore power, and run a spin cycle to confirm proper operation.

• What maintenance is required for the General Electric WH03X32158 Speed Sensor?

  Keep the washer interior area free from excess lint or debris that may reach internal components. Ensure wiring connectors remain firmly attached near the sensor location. Avoid moisture exposure during servicing. Disconnect electrical power before accessing internal washer components.

• What are common issues with the General Electric WH03X32158 Speed Sensor?

  • Washer fails to detect correct drum speed.
  • Unstable spin speeds during cycles.
  • Washer stops mid‑cycle without an error.
  • Erratic beeps or fault codes displayed.

• What does the WH03X32158 detect?

  It detects rotational speed information associated with the washer's drive system.

• What are the main components of a washer speed sensor?

  A typical speed sensor includes a sensing element, electronic circuitry, protective housing, and electrical connector.

• Is a washer speed sensor the same as a motor sensor?

  Not necessarily. A speed sensor specifically monitors rotational speed, while other motor sensors may monitor different operating parameters.

• What type of signal does the speed sensor provide?

  It provides electronic feedback representing the rotational speed of the drive motor to the washer's control system.

• Why is motor-speed feedback used in a washing machine?

  Motor-speed feedback allows the electronic control system to monitor rotational conditions during programmed wash and spin stages.

• From Refrigerators to Washers: How ENERGY STAR Is Changing Home Appliances Sep 07, 2026
• Ingredient Marketplace – Supplyside East: Explore Now Apr 01, 2024