The Whirlpool W11101059 Lid Assembly is used on the washer. This helps in sealing the washing chamber and the proper functioning of the wash cycle and operates by safely latching the machine and enabling the agitator to work without interference. The lid is better to withstand longevity of use and also to avoid breakage and leakage of water into the tank.
Step 1: The refrigerator is disconnected by unplugging it from the wall outlet. It is ensured that all power is completely cut off prior to proceeding with any tasks.
Step 2: The current lid striker is identified, typically located near the door handle on the upper section of the door.
Step 3: With a Phillips head screwdriver, the screws that hold the lid striker in position are loosened and taken out.
Step 4: The old lid striker is gently detached from the door.
Step 5: The new lid striker is installed, making certain it aligns perfectly with the latch that it connects to.
Step 6: The new lid striker is fastened using the screws that were removed earlier.
Step 7: The functionality of the newly installed lid striker is verified by opening and closing the door multiple times. The door should operate smoothly and securely.
Step 8: The power cord is reconnected and the new lid striker is rechecked.
Well done! Your Whirlpool W11101059 Lid Striker has been successfully replaced.
Please remember, these instructions are served as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.
